gifoki.blogg.se

Crystaldiskinfo current pending sector count
Crystaldiskinfo current pending sector count








crystaldiskinfo current pending sector count

If a sector is reallocated, your current will ‘effectively’ move down to ‘199’, which means a sector has become corrupt, and your raw value will go up. These are repairable by overwriting everything on the disk with zeros. A soft bad sector is sometimes explained as the “hard drive formatting wearing out” – they are logical errors, not the physical ones. Hard bad sectors cannot be repaired, but they can be prevented.

#Crystaldiskinfo current pending sector count plus

Plus not all manufacturers have tools like it, its still spyware free, adware free, no 30 day trials or large pricetags. It certainly is good at detecting possible hard drive failure as well. Its very good at SMART status and will tell you much about your hard drive such as temperature. How many Current Pending sector Count is bad?Ī number greater than 0 in the C5 – Current Pending Sector Count column will cause CrystalDiskInfo to set off a Caution warning. The error can cause drive corruption and permanent disk failure leading to data loss.ĮCC is Error Checking and Correction and the Uncorrectable ECC Count should record the number of times a data transfer within the drive had an error that was unable to be corrected by the ECC algorithm. parameter that indicates a number of uncorrectable errors while reading/writing a sector on the hard drive. ID 198 (0xC6) Uncorrectable Pending Sector Count is a critical S.M.A.R.T. You should, however, always make backups, because the hard drive might fail. How many uncorrectable sectors are acceptable?Īccording to CrystalDiskInfo there are 13 uncorrectable sectors which unfortunately cannot be fixed and my advice will be to backup the audiobooks on another data carrier and to continue using the drive.










Crystaldiskinfo current pending sector count